PDA

View Full Version : Transom Clamp Supplier

Jeffrey
03-09-2006, 08:22 PM
I'm looking for a US supplier of transom clamps used for compressing the core material when building up the transom.
Thanks in advance.
Jeff
gonzo
03-09-2006, 09:42 PM
Are you using plywood core?
COLE
03-09-2006, 10:30 PM
I have aluminum ones cant even remember where I got them, But The best ones I have we made using some 2x3 light steel and making a reach we needed and put a (T) in the middle with 4 screw points at each side 2 up the center and 2 on the end of the (T) I only use 3 clamps and have The force of 12 That is the best I have found is my own. and the material cost is quite cheap takes a half day to make them. JC
Jeffrey
03-10-2006, 04:12 PM
Gonzo,

I use 26# blue water Coosa.
Jeffrey
03-10-2006, 04:14 PM
Cole,

I'm not sure I understand your explanation but I have a good idea of how to make some, I just wanted to get some prices first.

View Full Version : Transom Clamp Supplier