moldsMTB
01-23-2006, 02:33 PM
Back in the late 80's our company was contacted by a friend that they had some boat molds they would sell us. We bought them shipped them to Tennessee and then coated them with a skin coat to protect them. We are interested in selling them and/or building boats off of them. But we really don't have experience in boat building. We are in the fiberglass manufacturing and have been for 24 years, but there is more to a boat then fiberglass. Is anyone interested in these molds?
The molds we have are as follows:
XL Deck 250
Part # 748
25 foot
2 Top Decks 25 foot
21 Foot
210 V Hull
# B44 (492912-1JJ2) VulCraft
210 Liner (20 Foot) #835
2 Molds- 210 Deck Inboard and a Outboard #761
2 16 foot Hulls
1- 163 TD Part # 830 Top
1- 163 DT Part 834 Top
30 Foot Deep Hull
Right and Left Subdecks
1 Engine cover Mold
The molds we have are as follows:
XL Deck 250
Part # 748
25 foot
2 Top Decks 25 foot
21 Foot
210 V Hull
# B44 (492912-1JJ2) VulCraft
210 Liner (20 Foot) #835
2 Molds- 210 Deck Inboard and a Outboard #761
2 16 foot Hulls
1- 163 TD Part # 830 Top
1- 163 DT Part 834 Top
30 Foot Deep Hull
Right and Left Subdecks
1 Engine cover Mold