- propeller dilema
- powerboat design book?
- Any good Aero-hydrodynamic book?
- 7,45 powercat design
- Are designs from female designers different ?
- Power Catamaran
- HELP ! Canting keel for 28ft performance daysailer
- opinions please!
- Hubby Needs Help
- Prismatic coeff...
- design projekt
- Some first attempts....
- Info On Old (Circa Mid 70's) Design Sought
- Aero-hydrodynamic forces
- Design Project
- Hin
- changing hull length
- boat design programs
- deck mounted booms
- Rudder question
- Help, Thrust Generated By Outboard
- wave making machine
- seakeeping
- Analytical propeller theory
- Hydro powered by 600cc F2
- strakes
- Sailboat Keel design
- electricity-free bilge pumps
- lines plan development
- 70ft+ steel , cheap plans
- thunder duck design#
- Wake fraction?????
- rudder size for long keel 50ft WLL
- Interesting wooden propeller link
- rotted inner layer of GRP hull
- Garvey
- Third Year Uni Project
- Sailboat controllability critetia
- More info on my design - changes too.
- The helm
- Need Qualified Candidtae
- hull & deckplanes Magnum27
- New design - could use some help
- New jet propulsion system
- new designer
- hollow entry?
- Hull Design Changes
- Clark Mills Biography
- How much detail?
- Mathematical definition of Boat planing
- ddc hull
- light air designs
- Sailboat stability...
- Free Shantyboat Design
- Building a wooden propeller
- Wageningen B-series propellers
- Troos B series propellers?????
- Yacht Design and Engineering
- epoxy to gel coat bonding
- Board Measurements
- small slow tunnel boat
- New guy here people, one question
- Grounding loads...
- race yacht design
- Jonesport or beal Island Lobsterboat
- Ferry Workshop
- Masthead vs Fractional
- Spline Weights
- Stability Crieria
- keel design
- CAD designs for sailboats 45 foot plus
- Small Sailboat Design
- English Spec
- New technology for Arctic shipping
- Hull Resistance
- extending the transom
- Windward performance?
- Re: pelin apollo design
- FRP hull thickness
- Big Cat, alt CB's & sail rigs
- Altering shoal draft keel?
- propeller for submersible
- Live Fish Carriers
- More 'freeware' drawings... PLUTO800
- W.H.White NAVAL ARCHITECTURE
- Is 55 ft too big?
- Overall beam of Tris vs Cats
- Determining draft
- Bollard/scupper design
- Yds
- Outrigger balance
- Loads for swept spreader rig
- prop pocket or delta section?
- Twin electric outboards
- Twin Rudders vs Twin Keels
- Congrats!!!
- ISO RCD on ISAF
- Boat manoeuvrability
- Rudder design question
- Help
- Ferry folk - moose viewing
- Recreational Rowing Shell
- Power / Sail catamaran
- full size plotting
- imo solas cad symbols
- Catamaran Modification
- Classic design
- Hard chine boat design
- Shroud placement
- bowthruster
- Yacht mast/hull info
- boat specifications/ plans
- Tiller, Kitchen rudder
- My first design
- moment of inertia
- Concept to basic line drawings - 40 foot power boat
- 30 mph Amphibious Car
- Bass Buggy
- Small Craft Design Papers CD
- Gelcoat over Epoxy
- Flat Panel Development
- Planimeters
- feedback on hull design
- A Tale of Two Hulls....
- Club Boat
- dory vs v-hull
- Need Help with Aluminum Hull Designs
- rod vs conventional wire rig
- Sailboat Styling
- just a question
- Bow Flare
- yacht research publication
- Converting sail to power
- Soft bilge hull vs. Hard chined. Are both seaworthy?
- barco DIABLO 15
- Non Gasoline Tender
- Developed Surfaces????
- Drafting materials
- searching for one of the professional boatbuilder CD
- longboats
- WishBone Sailing Rig
- Initial Consultation with a Marine Architect
- 4m single handed keel boat
- HP ratings for small craft
- Power Boat design calculations
- Ironheart
- Adding steps to a small inflatable
- twin keel design
- Paqurus
- Water Ballast
- IMS rule
- Airex and any foam based hull materials
- Modify older Smoker Craft 14' Alum.
- Design of small Powercat???
- gaff rig design
- Please Advice on Hull Selection
- Full Displacement of semi
- boat plans
- advice on plans
- gaff schooner
- Propeller Pitch
- Searching the Memory Banks
- urgent calculation
- Square boat cruising catamaran
- Using floatation foam to keep a dingy inflated
- Portager Trailerable Poll
- Which is the most economical kind of small vessel?
- Portager's Light Weight Engine
- Portager size Poll
- Free design for amateur boatbuilders
- price of mold?
- Portager
- Retro-styled sportboats
- I need your help
- Fuel, water, black water tank construction
- keel configurations
- Minitransat Open 6.5m
- Warped plane vs constant deadrise
- Double end power boats?
- 18 ft forecast fishing boat
- Summary of Power & Propeller Design Steps
- Staggered bottoms?
- PWC Design
- canting keels and all that
- Rudder bearing service
- Offshore CAT help
- Planing sailboat theory question.
- Design and Drawing of First Boat
- 262ft-Megayacht Design Project
- Assist with prop choice -40-footer
- double chine hull design
- Building my first boat
- Anchor Sizing
- Seacock manifold system
- ISO 47.080 Educate me pls
- one man fisher
- Hull design Copyright/Patent Infringement?
- Lessons in CAD design
- Flat bottom, lwl/Tc ratio?
- an unsinkable tub??
- UK Suppliers
- How much HP?
- design questions
- Pilothouse Sailboat Design
- Boat plans
- boat design
- sailboat design books?
- Single Diesel Viking performance
- Spline or Bezier....that is the question
- Water tight bulkhead door
- Boat building supplies
- why not outboards?
- Florida CAD/Marine Design firm?
- Reverse strakes, planing chines
- Lines
- Planimeters
- calculating hull displacement
- Wingboat Design
- looking for answer to puzzle
- High Speed Narrowboat
- Monohedron vs. Warped bottom
- Plexiglass maximum radius curvature
- prop calculator
- Rookie at this.....
- Tunnel Design help for Flats Skiff
- Semi-planing vs semi-displacement
- My canoe is coming along
- cat hull transom height
- twin engine/single rudder?
- GZ GM Cb Cp and other
- simple catamaran hull design
- Multihulls vs. Monohulls
- Rudder relocation due to change in proprotation
- Z Drives
- Hovercraft
- Frank Pelin Plans
- Hey guys - need your help
- Looking for B&R rigging info
- new rule for the WOR 70
- small boat design
- Does the use of lead shot devalue a boat
- outboard engines / dimensions
- Steering location
- yacht interior cad files
- ABS Guide for Building Racing Yachts, Sandwich Divisor
- I need some help here
- Liability Risks
- Herreshoff
- Mast location advice sought
- floatation formula