- 1/4 inch Plywood canopy roof
- Caulking an antique deck
- Plank (and ribband and frame) deductions
- Total noob. Small plywood sailboat questions.
- Help cutting plywood
- Mold, Mildew stains in oak and fir
- Glen-L TNT
- Trying to identify
- Need help with boat repair
- New Heron owner....advice needed
- What is this boat shape called & Need a restoration checklist please
- Advice needed for stringers and bulkheads
- NCIS boat build
- Help
- Western red cedar question
- Looking for input and advice
- My first paddle..
- obtaining insurance
- to prime or not to prime?
- Advice needed at final stages of lofting
- 16 yr old restoring a wooden boat..HELP!!!!
- i need info on my 1930's peterborough please
- Titebond III testing
- plywood/epoxy question
- To fiberglass or not ??
- Alternate planking style help
- C'mon, sombody post on building a Jon boat or a Pram.
- Drift Boat Rebuild
- restoring VANDA, 1926 40' Alden schooner (reposted from 'motorsailers')
- Rosawa
- 3 coats of epoxy after fairing and sanding - is it a must?
- Varnish anomalies
- prototype boat and model questions
- Paint vs. Epoxy Coated hull; Joel White Shearwater
- epoxy coating a wooden boat
- 1/10 Scale frigate...
- Help on my Keel
- Scarphing DF mast blank
- Enterprise renovation-partial cold mold
- 21' Gato Especial Catamaran Project Underway
- Interesting Vessel Thread
- Lapstrake multi-purpose "canoe" plan options
- old sloop
- Bartender tender
- Skin-on Frame Kayak Building Jig
- wood frame Hovercraft
- deck issues
- Big Thanks!
- My little wooden boat project... by a complete novice
- restore plywood boat
- Epoxy types and usage
- Fasteners; Remove,replace,or???
- Under Deck Foam Flotation?
- epoxy and glass over wood
- 1957 Century Palomino: Help with interior framing
- Shannon One-design wooden sailboat
- Is Poplar an acceptable choice for boat sides?
- Wooden Boat Builder Community
- El Toro Damage
- 8' El Toro Damage
- 8' El Toro Sailing Pram Renovation
- 1959 Chris Craft Sea Skiff 35' identity
- Wood and Glue for Sailing Canoe
- Looking for western red cedar in Northern/Central California?
- New Book by Glen-L
- Paint Removal Solution
- Building my first boat.....
- Wood Strip Canoe Supplies
- cetol on dunphy hull-help!
- Mahogany restoration
- Pine pitch for caulking.
- 1961 42' Matthews Stock Cruiser advice needed
- Strip-building with a pneumatic nailer.
- Paint for oily bilges
- 1956 46' Chris Craft Constellation.
- What is the syringe/resin method?
- Fishing boat designs:2
- Restoration of Picaroon
- Is Epoxy compatible with Glycol?
- Under deck ventilation?
- Greenwood xl Plywood ??
- Decay
- barn-door rudder
- sheathing
- Building the Mushulu 14
- fresh water slime
- sewing a wood boat?
- How to make my own epoxy primer?
- Worm shoe
- Little Red Hen - Clinker Dinghy
- Teak wax
- Question
- Best way to turn 19m cold molded epoxy boat
- Plywood boat leaks :(
- Enterprise repairs
- restoring a painted crew oar
- What construction method was used on this boat?
- NF Boat - Carvel-Strip Combo
- Lead vs. Wood Keel
- Carolina CC, jig or plank-on-frame
- Monk Man
- Colorado wooden boatbuilders- a shout out
- Herreshoff H28- new and never in H20
- media blasting plywood interior (using walnut shells?)
- back on my wood oars again, what glue to use?
- 1948 Gar Wood restoration
- Keel Concerns
- advice on scarfing hog
- wooden boat
- Has anybody built a Jon Boat?
- Enterprise Centerboard Casing
- New Streamliner
- House/Shanty shortcut question...
- Do I need to visit a sawmill?
- GRP floors
- Redecking Pontoon Boat
- PD racers in South Africa
- Cobalt Accelerator
- I have a question on the use of a boat?
- Bitumen Paint
- Dried out
- canoe yawl IRIS modifications
- My new project needing advice
- mast design
- Survey Questions - 1929 Elco 36'
- venture27
- Making wooden oars?
- 1947 Snipe Woody Restoration
- Classic stainless steel bow strips
- Wooden equivalent of a Classic in glass sought
- Are Trim Tabs Required
- New to Boatbuilding...And Naieve?
- Using west system epoxy to glue afromosia
- Gunnels For Boat, What Wood To Use?
- offsets question atkins shoals runner
- Removing ballast
- A Pulley Driven Drive Shaft
- Build a Wooden Pirogue
- Finishing teak?
- Cold-Molding Over Planking?
- Engine question
- Marine plywood for frames
- It's Here!!!!!
- Wooden Yacht - Integral Strength over Time
- 80 ft wood houseboat flat hull needs shell
- Some questions
- Monel 1/4 inch narrow crown staples
- Project Brockway Skiff
- Restoring my Arcangeli Jolly
- Wide Gap Strip Plank - what problems could this building method cause?
- Rowing Dory Plans
- Need a few pieces of teak...
- Refinishing Paddles
- New to the forum
- Carbon Kevlar hulls an update on C'est La Vie
- Need some help with spotted gum shelves
- the dream, maybe you guys know something about doing it the old fashioned way.
- Pounce Wheels for tracing Plans
- lapstrake building.
- Planking width?
- New Here, Hi. Want to Build a Plywood Kayak
- Restoring a classical canvas canoe
- 50 foot 58 constellation, What to look for when buying?
- Resto Project - 19' day sailer
- Oh Joy is finally feet dry
- BEWARE Neglect!
- Sealing wood? (followup on Mongo's post)
- Scarf alingments?
- Painting wood
- A Layman's question...
- Power tools
- need expert advice
- Alternate planking or different design?
- Second Build Selection
- 9mm plywood cover with fiberglass
- 1967 48' ChrisCraft Constellation Restoration
- plywood shear strength when thru bolted
- Paint with fungicide
- Shipwright needed in Bay Area
- need help identifing this boat,please
- Wood/Epoxy Keel and Keelson
- sandblasting a wooden boat
- Novice Looking for Advice on Small Wooden Boat Construction
- 1973 SIlverton restoration finally starts to look like a boat
- My first boat, a vintage dinghy.
- Warped cabin sole
- Lapstrake assistance desired
- Built a scarfing gjg!
- Screwing and nailing!
- Progress...
- build or buy new
- Patching Holes and Repairing Rot
- Restoring a wood drift boat
- The King - 1902 built Thames passenger launch
- Repairing holes and rotten wood
- In over my head!
- 16' drft boat
- 1962 Chris Craft Cavalier 25'
- Public domain designs
- Floor in tinny
- The Phoenician Ship Expedition
- laminating ply
- epoxy painting question?
- stitch and glue?
- Dinghy Repairs - New Poster
- Thwart Placement for Rowboat
- Building an Instant Boat
- curved decking
- 1951 Dual Cockpit Restoration
- paint for wood and figerglass
- Help on Wooden Mast Head
- 1956 chris craft continental
- Rangeley #2 - Complete Resto
- SOS Falls of Clyde
- Rabbeting a keel
- Mercury 22 footer coming along nicely
- Plywood Scarph Joint Ratio
- Saturating Epoxy on Plywood
- newbie needs advice
- 48 cu. in. Hydro Project
- Daggerboard/case clearance
- 1989 ply over glass pictures and help please.
- Hard Yard Full of Wooden Beauties
- Wooden Blocks
- Trailerable version of carvel?
- Chris Craft Capri questions
- Varnish stripping help required!
- Should I repair my wood mast or use aluminum one?
- Coracle plans?
- Final Polish of new deck
- New to this forum, interested in wooden boats
- Plywood 15.5' Boat Construction Newbie needing help
- Hours to build a Swift Solo????
- fiberglassing plywood hulls
- Building three boats, need suggestions for third...
- Wooden Boat Restoration
- Silicon bronze fasteners
- bead and cove bits
- Cauking Help
- Looking for cedar plank rowboat plans
- How To Scribe A Waterline
- Looking for CNC routing in Australia.
- raft race boat???
- 12mr restoration
- 1957 Chris Craft Capri decking
- Hey all newbie here
- Missing In Action Finally Gets his Floor Installed
- Help Needed with Boat Plans
- Advice
- Vancouver Meet at Beach