- Damaged Rudder-fix or build new
- Keel : Rudder Length
- safe temp for a Perkins 4108 50hp?????
- Plans for 'Egoist'
- fiberglass over molded foam core
- Solid wing sail papers
- Coleman electric plant with marine smoke scape
- Guy Saillard
- Bow Wing
- Need fuel lines for a Perkins 4108
- Phil's Foils
- Anyone familiar with the Ericson 32?
- Good Books
- sailboat bows
- Why move crew to the bow going down wind?
- Keel Replacement
- What's that "sail"boat
- CFD consultancy
- rub rail replacement
- Melges 24 Carbon fiber mast
- Schooner Sail Handeling
- Tirhandil plans, 3D models, books
- Want to make my own sail for Bolger Windsprint
- Considering building a boat..
- just how heavy is it
- A boat I'm considering to purchase...
- Retractable keel, engine + mast
- Sailboat hull refinishing
- Keel section question
- sloop or cat rig?
- Centerboard area
- Newbie mast repair questions
- Mounting a boom higher on the mast
- Hull joint extrusion
- 5.5 Meter
- Water Ballast & Keel Ballast
- Keel edge
- Help!
- Frameless Construction
- Bwahaha! Ametuer Yacht design at its finest!
- flat bottomed sail boat
- Keel Placement
- Lightweight Canoe
- Low reynoldsnumber rudder
- Outboard As A Saildrive
- Pirates!
- will this work? any better ideas?
- composite mast modeling (Uni proiect)
- Keel Trim Tab
- Shallow draft rudder foil-wild
- lead in aluminium
- Can you ID this abandoned boat?
- Launch of my car toppable planing cat
- Designer: J. Murray Watt?
- Self 'lubricating' hull design
- Pros and Cons of Transom Hung Rudders
- keel/centerboard assembly
- Sunfish cleat support gone bad
- What's better Sail Or Power
- Radar Reflectors
- Help Identifying my sailboat
- Bristol 26', depth sounder going bad
- MiniTransat laminate schedule
- weatherhelm
- rudder surface
- Capsize test....for real
- Scow moth....fun looking boats
- Math Anxiety (newbie)
- Hot Water Heater
- New Orc BOX Ruels
- Water Ballast vs. ???????
- el cheapo IRC racer
- S&S 34 specs
- Keels and Rudders: Engineering and Construction
- Radar reflectors
- Coutts on Morning Glory
- Fixing lead filled sheet metal keel with internal corrosion
- Swing keel flap question
- 25' trailer sailer
- new guy needs opinions.
- Finding the CoE on a 10.5ft sciff?
- CBTF smashes Transpac record/ Waterballast dead?
- What kind of open sail boat is this, Spanker like?
- 26" Bristol, needs new 6HP outboard
- Lasers
- Row boat conversion
- Looking for Choey Lee Lion
- Monoes vs. Multies - below 30'...
- Heavy Classic Plastic
- Boat Buying HelpΏ
- You Might Be A MacGregor Sailor If...
- Cordage
- Cherry Update, First regatta
- Twin Rotating Foils on Multihulls/No Daggerboard
- Mac 26 "Blam" Thread
- The Steersman
- SailRocket
- Taylor Kerosene Stove
- Intentional Hydrofoil Ventilation/Altitude Control
- Wet Balsa Core Repair
- Stern extension
- keel bolt torque specification
- Mast / Spar removal - repair
- MultiFoiler Design: altitude/RM Control
- Cal 2-29
- Coopers Seabird 37'
- Some Newby Questions
- Foils in scale sailboats
- Morgan Embroden
- Kites
- Solid Glass Repair?
- IOR to IMS
- Question on 18th century schooners
- 65'Sailer/Motor-sailer luxury interior & exterior design
- stanley 19
- The Pacific High (anti-cyclone)
- Custom Sails
- radical redesign
- Parts Question...
- The Ultimate Sailing-Cruiser?
- evolution 26
- Inspiration 1050
- vd stadt Swing Rig
- Pictures of a 1950s Brazilian-built 37' cutter
- Back To The Future.....
- Synthetic Rigging
- Fixed Fire Suppression Sustems
- diesel engine ferryman
- Seeking advice re: 27 - 33 foot offshore capabale sloops
- Stability at low heel angles?
- Invitation to join SNAME technical panel
- 24' Solo-circumnavigator (.dxf file attached)
- -CBTF and VARA-
- 100' Supermaxi
- 54' sailboat construction photos
- Open 650 Design
- Excellent deal in CA
- Open 605 Class rules
- Open 650 Class Rules
- what is the best type of sail for the money?
- A structural question ...
- outboard prop
- Sail Boat Formula
- A new type of spritsail-like rig ?
- how to improve performance
- carbon spars from china or far east??
- Question about stainless stanchions
- How to trace and cut bulkheads
- Replace Rod Rigging?
- My Project: Bent Stainless Pulpit Question
- Builtin GAS tank question
- Keel options
- Classic 6m Class
- Minisailing boats
- New menber lost
- Mast/centreboard position/size
- Reproducing Boat Plans
- Directional Stability
- 16' Keel boat-high performance
- Stepping the Mast
- Cherry is Complete
- Main / jibe size relationship?
- Roberts 53 MC steel ketch opinions
- Transome mod
- Frederick M. Hoyt
- Headsail Rigging Question
- foil shapes
- Should we impose a sail area/length2 limit?
- John Spencer's designs
- Flying Moths
- why canting keel?
- Concept day-sailer / tender 12 ft W
- engine exhaust question - sailboat diesel
- Vanguard Nomad
- Displacement distribution
- Skandia
- Self Steering Gear
- Seeking Herreshoff Meadowlarks
- Manufacturer's mold mark
- Building another rudder (winged)
- foredeck layout
- 14' concept sailing W
- Bavaria Match 42 lost its keel...
- Stainless Steel Question
- I wonder??
- Stored Energy In Sailing Races
- canting mast
- Looking for Book's
- Small Sail Designing Tips
- How do I ground my electrical system?
- Daggerboard Position:Interesting Moth
- New Rudder VS Old
- Sailing efficiency: % or multiple of windspeed
- Deck sweeping sails
- Article: "Foilers here to stay"
- Sailing a 10 ft twinhull- standing
- New (possibly) idea for monohull stability in rough seas
- Do I need the mast support?
- The Cherry project continues
- Heeling Arm
- I removed the wooden plateau and replaced it with a fabric trampoline - stability??
- Stepped Planing Hulls/small sailboats
- j/27 rudder replacement
- Scratch Repair
- Sail CFD - Help interperate my results
- Reactive rigs
- Newbie in need
- lifting keel mechanisms- hydraulics?
- TMF versus CBTF
- Another Rudder Question- The Wing
- Hurley 18
- Canters tacking
- Flying Dutchman Linesplan
- Faster upwind tacking by taking turns towing?
- Tornado Design!
- Big Mac 65
- Pt 30 Mk2
- Sailing Dinghy Poll
- Another Rudder Question (NACA)
- Surfboard-like CLR on downwind racer
- Good boats w/ shoal draft keels?
- Lynx 14 or 16 trailersailer
- Designing a Rudder
- Northwest 21 Trailerable Yacht
- Need Designer
- keel alloy mechanical properties?
- open 20 footer
- Peterson 34
- Keel Bolts
- What type of rig is this?
- CCPlans.com - Heard of it?
- Conversion of sail boat to power
- whisker poles
- Regarding the MacGregor 26
- Best Dinghy?
- flash back
- Wing-drive
- Wheelhouse
- So, Are They Planing?
- Mac26X on Steriods?
- Canting Keel Design
- ISAF vs KITE Sailing
- A new mini
- GZ curve
- There is always hope
- Projection 762 Plans - Stephen Thomas
- Squirrelly feeling == lee helm?
- Wing sections?
- Sailing a new small twinhull (Help!)
- Spreader to diamonds