Random Picture Thread

[SamSam]

.

Nederland

 

[Angélique]

This came up in this conversation*, a piece of WW II history, SS Jeremiah O'Brien, one of the only two preserved Liberty Ships, the other one is SS John W. Brown . . .

* (consisting of 5 off topic posts now, so please don't respond there on it to prevent further distraction of that thread . . . )

- - click pic to enlarge - -

I'm not sure a close up of the "polynesian fantasy" paintings on the bow gun armor fits protocol here, so those interested best look at the gallery of SS Jeremiah O'Brien's Wikipedia page . . . .

 

[hoytedow]

Victory ship: http://www.americanvictory.org/

https://en.wikipedia.org/wiki/Victory_ship

https://en.wikipedia.org/wiki/Marshall_Plan

 

[SamSam]

Constructed from the 12th century right up to the 20th, tulous are typically three to five story structures with a thick earthen wall and a single entrance. They tend to be vast, well-fortified structures, capable of housing up to 800 people.
In fact, they originally functioned as village units offering safety, shelter and a sense of community. In 2008, the tulous were named as a UNESCO World Heritage Site. Among the thousands of Tulou buildings, the Zhengcheng Tulou is one of the most famous. Popularly, it is known as "The Prince of the Tulous".
- See more at: http://www.cquek.com/2014/06/fujian-tulou-china.html#sthash.oOdtIaIb.dpuf

 

[SamSam]

.

Why I'm not allowed to cook anymore...

http://i.imgur.com/hWkRuR8.jpg

 

[Jolly Amaranto]

I actually had something like that happen once. Although it had nothing to do with cooking. I was using a old pressure cooker as a chamber to cure polyurethane resin castings. This compressed all the bubbles in the casting to almost nothing. Only problem is pressure cookers are designed for about 15 psi while I was going way beyond that. The flange tabs on the pot bent up and released the lid with an explosive bang. The lid went right through the ceiling of the garage into its attic.

 

[SamSam]

I've never wanted to be around a pressure cooker once I heard they can explode.

I never thought about water heaters until I saw one over pressurize on Mythbusters.

It goes off at about 1:40 in the video...



The entire first floor of this house was obliterated by a failed water heater

http://www.ksl.com/?sid=23271741

 

[SukiSolo]

The Prestige pressure cookers are certainly designed to work at around 1 bar, but the maintenence instructions also say check the pressure relief valve periodically! Nice pic demonstrating what happens when you don't!.

In fact they are regular replacements, as the rubber get hard and scale builds up against the plunger. Probably the biggest (in terms of numbers) cavity tool I've ever come across - 80 impression. Makes the 16 cavity promotional dinosaurs for cornflake give aways seem very small..... and as the material had a blowing agent that could have blown the tool too.....

 

[Angélique]

Victory ship: http://www.americanvictory.org/

https://en.wikipedia.org/wiki/Victory_ship

https://en.wikipedia.org/wiki/Marshall_Plan

Thanks Hoyt,

Let's not forget to commemorate and celebrate them on 27 September . . .

- - picture from Hoyt's above first link - -​

 

[SamSam]

Probably the biggest (in terms of numbers) cavity tool I've ever come across - 80 impression. Makes the 16 cavity promotional dinosaurs for cornflake give aways seem very small..... and as the material had a blowing agent that could have blown the tool too.....

I don't understand what you're saying here...

 

[Angélique]

From BD member blared's gallery..

http://www.boatdesign.net/gallery/showphoto.php?photo=15418

That looks like a set from Waterworld.

It does look odd with 9 cylinders, that big pipe (which would do what?), sitting perfectly level with not a bit of the rest of the ship (?) to be seen.

I did an image search but the results refer back to blared's gallery. It's a mystery.

Same search results for me, I'm still wondering what it is though, anybody has a guess . . .

 

[SukiSolo]

I don't understand what you're saying here...

The mould tool makes 80 units in one go, ie 80 rubber pressure valves (minus the plunger of course) not one at a time. Multi cavity tools are pretty common but not usually at this number of impressions (mould shapes). You can sometimes see the number of the tool in part of the marking near the date stamp etc if a part is from a multi cavity. This is for Q/A in case one mould goes out of tolerance. I've designed a few parts that were 2 or 4 impression.

The later comment is about thick Polythene mouldings which can be restricted from shrinking by adding a foaming agent. However if you get the percentage added a little too high it can explode in the tool and wreck it....

 

[Sailor Alan]

Sam Sam, Angleque, et-al. This is a classic slow speed marine Diesel engine. It was designed as a 4 cylinder, and 5 cylinder engine, possibley as modular units. To get the requisite power, a 4 and 5 cylinder unit were joined using a flexible crankshaft coupling. As these engines were custom built from standard drawings, hence the modular build, and the spacer between the two sections of engine. Some engines took power from this 'joint' but I doubt it in this case. The 4 cylinder and 5 cylinder crankshafts could be balanced for vibration, but a 9 cylinder could not. The large diameter tube is the induction (inlet) for the end 4 cylinders, the matching one for the other cylinders is missing. The position of the induction tube on the cylinders suggests a two stroke, which uses a blower or compressor to push the air charge into the cylinder. The exhaust will be on the other side, and may wel be completely rusted away. The exhaust is subject to high heat, and therefor rusts quickly. The induction remains relitivly cool, and therefor less likely to rust. I'm not sure but these engines ran around 50-80RPM.

Where the rest of the boat is, who knows. But if it was wooden this is not surprising, though this is rather large for a wooden boat.

 

[khaos]

Thanks Sailor Alan! #mysterysolved

 

[Angélique]

Hi Alan,

Thanks alot for the info . . .

All I could get out of it was it's a big 9 cylinder engine wreck with a spacer and a big tube.

Your post brought me to this search ‘‘low speed marine diesel’’ perhaps this provides further clues for aficionados to solve the mystery . . .