|
|
| Boat Design Forums | Boat Design Directory | Boat Design Gallery | Boat Design Book Store | Thanks to Our Site Sponsors | Sitemap |
|
|
||||
|
Page iv
|
VOLUME I
|
INDEX
|
||
|
|
||||
|
INDEX
|
||||
|
|
||||
|
Page
|
||||
|
|
||||
|
FOREWORD ................................ i
INTRODUCTION....................................................................................................................... ii
INTRODUCTION TO MATERIAL ORGANIZATION................ 1
1. Preparatory Work to Establish a Boatyard Overseas............. 1
2. Materials and Equipment Organization.................. 5
3. Organization of Tools in the Yard.................... 6
4. Drawing and Lines Plan......................... 10
5. Catalogue ............................. 22
6. Construction Schedule for Vessel.................... 30
7. Production Planning Chart....................... 43
STAGE 1
JOB 1 - Making Hull Frames........................ 45
Task 1 Making the Lofting Floor................... 45
Task 2 Sanding and Painting Lofting Floor................ 46
Task 3 Layout the Lofting Grid.................... 46
Task 4 Lay Out Hull Profile..................... 49
Task 5 Lay Out Hull Sections..................... 50
Task 6 Lay Out Waterlines and Sheer in Plan View............. 51
Task 7 Set Up Hull Frame Bending Bench................ 52
Task 8 Drive Nails Along Lofting Floor Station Lines........... 53
Task 9 Cut Rods for Hull Frames................... 53
Task 10 Bend Hull Frames...................... 53
Task 11 Mark Reference Lines on Hull Frames............... 54
Task 12 Store Hull Frames in Pairs................... 54
JOB 2 - Making Up Deck Beams...................... 55
Task 1 Deck Beam Welding Jig .......................................................................................... 55
Task 2 Cut Flat Bar to Approximate Lengths............... 56
Task 3 Weld Deck Beams in Jig.................... 56
Task 4 Master Pattern for Deck Beam Camber.............. 57
Task 5 Deck Beam Bending Jig.................... 57
Task 6 Check and Hammer Deck Beams to Master Camber Pattern...... 57
Task 7 Cleaning and Priming Deck Beams................ 60
Task 8 Mark Center Line and Buttock Lines on Deck Beams . 60
|
||||
|
|
||||